For Saving Home Service Inc

This was a big project in our home where the utility room is in the middle of the basement and not near an exterior wall. 4 big old furnaces needed replacement with complex sheet metal work required. 2 water cooled airconditioner units inside the house were replaced with outside A\C units. New PVC piping and copper had routed to the west side of the house through the pool room. We had obtained quotes from 5 HVAC firms. We went with FOR SAVINGS INC. because 1.Max Shin from the company did the most thorough initial assessment, including measuring the flloor space on each level, the number of vents and how well existing equipment was working, and where new piping could be placed and 2. because they install Lennox equipment which is what we wanted. The 2 crew who did the work were superb - they were punctual and they worked extremely hard. The crew were Chinese speaking with somewhat limited English. Max visited daily to supervise and called us at the end of each day to give us a progress update and to let us know the plans for the next day. The job took 8 days. The end result is superb. This company offers an excellent service and we look forward to dealing with rthem in the future.

Purchased a Lennox furnace and AC from "For Saving Home Services." Max was knowledgeable and very professional. He looked after manufacturer's rebate paperwork, recommended a home energy audit for further savings and responded promptly to e-mail inquiries. Price was competitive. Installers were tidy, punctual and courteous. I would recommend this company to anyone looking for HVAC work.

We were very pleased with the work they did. They were professional and very efficient.

I was looking to replace my Air conditioner and placed call with different companies and got several quotes. I got an appointment with Max Shi by calling For Saving. He discussed all the available models and installation and also discussed about government rebate. He was completely honest about the duct work being a potential issue. Upon reviewing all of the options Max was able to quote installation of a brand new, top end, high efficiency system that was slightly more expensive than the lower end brands that others had quoted me on.
After a week I got an installation date The installers arrived late due to some issues on the day of installation, however worked extremely hard and diligently until the work was completed. The work was meticulous and carefully completed and they cleaned up after they were done.
I am extremely happy with the work that was performed and our house has never been cooler. I'm looking forward to lower utility bills for years to come.I have no issues in recommending them to my friends and others

I got an appointment with Maxx by calling Fore Saving. It was quick response. He gone through all detail information for installation and models and also discussed about government rebate. After two days I got an installation date Peter and other guy came both did satisfactory job and cleaned the place . I am happy that call Fore Saving for this job.

I screened several HVAC contractors and settled with For Saving Heating and Cooling since they were one of the few Lennox Premier Dealers in the area. For Saving provides top-notch hardware with competent technicians, and honest salesmanship. Their website certainly needs an overhaul, but that’s not reflective of the actual service and hardware they provide.

I received my $475 rebate as promised. The rebate took three months to process. All paperwork was taken care of by the company.

I thought the "Premier Dealer" was marketing fluff. After some research, I learned that Lennox Premier Dealers supposedly undergo more stringent testing and training from Lennox themselves.
I went to Lennox's corporate site (www.lennox.com/locate) to verify that For Saving is actually a Premier Dealer. Apparently if a contractor fails to meet Lennox's standards, the contractor has their "Premier Dealer" approval revoked.

Now, how much of this is marketing and truth, I'll let you decide for yourself. But If I had to choose HVAC contractors, I'd select from companies who are factory trained and authorized by Lennox.

What I gathered from my research was that the installation of the hardware is just as important (if not more important) than selecting fancy hardware. Imagine having amateur mechanics assembling a Ferrari engine.

Tony was very upfront and honest with his opinions. For example, he told me not to buy a more expensive A/C unit because it wouldn't be cost effective in my situation. He was also the only salesman to open the furnace and verify that the furnace blower was strong enough to support the new Lennox A-Coil. He was patient and made sure I understood all the options.

Tony gave me a competitive and detailed written quote the day of the first visit. One big-name HVAC contractor came by, took a look, and didn't bother to write me a quote or give a price. Instead, they showed me a chart with price ranges and told me they'll be back if I was actually interested.

The installation on the day of was clean, precise, and well done. I mentioned to Tony that I wanted the experienced technicians to perform the install and not to use sub-contractors. Luckily on the day of installation, Jimmy was assigned to do the install and his experience shows. If you can, ask for Jimmy to perform the install. He's personable, communicates well, and takes pride in his workmanship.

Now, onto the hardware. I ended up going with the Lennox XC14. The XC14 is very quiet (70Db). The initial kick when the compressor turns on wasn't as loud as I expected.

The entry-level Lennox 14ACX Merit was another option. After doing some research on the XC14 Elite (higher end) vs the 14ACX Merit (entry level), there were two key differences:
1) The XC14 is assembled in the U.S (Dallas TX)
2) The XC14 is better built unit with higher end parts.
3) The XC14 is much more quiet due to a compressor cover.

If your budget allows for it, go with the XC14. Bonus: The XC14 is
sleek looking.

So far, the Lennox X14 is performing as advertised and keeps the home cool on the hottest of days.

I had Max over at our house to provide me solutions for our 4 story stacked townhouse. The major issue was the cooling on the top floor and short cycling of the furnace in the winter due to insufficient airflow. He was not only was honest about the drawbacks to the solution I was hoping for but was completely honest about the duct work being a potential issue. Upon reviewing all of the options Max was able to quote installation of a brand new, top end, high efficiency system that was slightly more expensive than the lower end brands that others had quoted me on. The installers arrived late due to truck issues on the day of, however worked extremely hard and diligently until the work was complete around 9 PM. The work was meticulous and carefully completed and they cleaned up after they were done. So far, I am extremely happy with the work that was performed and our house has never been cooler. I'm looking forward to lower utility bills for years to come as our house cools to the set point and actually turns off, unlike our old system.

The guys came in, placed a tarp to protect my floors and worked through a snowfall in may to put together my air conditioner.

Arrived when they said they would, installation done in a timely manner. Cleaned up and left no mess.
We requested a cement slab for the outside unit to sit on, we didn't want the one they brought with them. They went out and bought one at the local building centre.

I was very happy with the work they did. The guys were there to listen to my requests and they did all the required fittings and installation of the units pretty well.

The salesperson Max Shi who came over to us explained everything to us very well, and was always there and willing to help out. Peter who installed the unit together with James did a great job in the installation. We are satisfied with the purchase of the unit. Thanks.